PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901)

PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901)

Marsoni

M251S

$304.51

Get it in 3 business days with 1 day shipping. Friday, May 29

PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901)PAGID RSC Race Bremsbelge fr Keramikscheibe E8006 (OE Teilenummer 99735294901) NEU ENTWICKELTE BREMSBELGE FR KERAMIKSCHEIBEN . Dieses Produkt Polsterstrke: 19 mm PAGID Racing RSC Compounds wurden entwickelt, um den neuesten Anforderungen der Keramik Verbundbremsscheibentechnologie zu entsprechen und alle aktuellen kologischen Standards der Automobilindustrie zu erfllen oder zu bertreffen. RSC 1 ist ein harzgebundenes Material mit niedrigem

Easy Shipping

Quick Dispatch:

Your PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901) orders ship within 1-2 business days.

Delivery Options:

Standard: 3-7 business days
Fast: 2-3 business days
Express: 1-2 business days

Order Tracking:

You'll receive a tracking link by email once your PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901) ships.

Need Help?
Questions about PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901), sizing, or delivery? We're just an email away.

Live Shipping Estimates:
Enter your location at checkout to see available shipping methods and costs for PAGID RSC Race Bremsbeläge für Keramikscheibe E8006 (OE-Teilenummer 99735294901) in your area.

Get Shipping Estimates

Country Zip/Postal Code

Exchange/Return Notes

We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Please click here for more details>>> Return & Exchange Policy

Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on April 16, 2026

Verified Purchase

Nancy filippi

New York, US

★★★★★ 5

A must pull your gimbal bearing

You do need to drill a hole but worked perfect

WAS THIS REVIEW HELPFUL?YesReportShare

Reviewed in the United States on December 26, 2025